Recently i bought a Dbilas Camshaft Kit ( 266º Sport Road ) for my C16XE engine.
My question is this, my engine head went to the CNC machine once in the early days, in order to correct wen i burned the gasket, and now again, along with the engine block, because i open a hole in one of the pistons. The head was always ok, and the two corrections where just the normal thing that you do each time you open your engine, and it was not done because of overheat or any other reason, so the correction was nothing BIG except for the block it self ( if you know what i mean )
So, do i have to pocket my new pistons ( 79.48mm ) in order to recover the measurements so i can use the camshafts without having the valves hitting the pistons ????
Here are the Camshafts Specs:
Duration: 266
Peak Timing : 110
Valve Lift: 1.1
Valve Timing: 23/63 - 63/23
Valve Spring Hardness: Serial
Correction done to the engine:
Engine Head: Twice
Engine block: Once
PS: I´m going to use Standard Valve Spring, Standard Valves and Standard Valve Guides.
Thank you for your help......hope to made myself clear and sorry for my bad English.
